![]() GFCI outlets regularly fail and for no apparent reason. If you believe this is the case, replace the outlet with another, similar outlet. Rarely will conventional, non-GFCI outlets fail, but this does happen sometimes.Bare copper or green plastic-coated wires are ground wires they will generally not cause an outlet to stop working. Check that all of the wires are properly connected to the outlet and that all pigtailed wires are firmly connected under wire nuts.Two screws (one at the top and one at the bottom) hold the outlet to the electrical box. Unscrew the outlet from the electrical box.Remove the faceplate of the outlet that is not working, after first turning off the circuit breaker on the electrical service panel. ![]() If so, reset that GFCI outlet or replace it. If any of these outlets are a GFCI outlet, they will affect all downstream outlets (or load away from the circuit breakers), even if those affected outlets are not GFCI outlets. Go back to the outlet and check all upstream (or line in the direction of the circuit breakers) outlets on the same circuit between the affected outlet and the service panel.If it has, flip the breaker in the opposite direction, then back again in the correct position. Go to the electrical service panel and see if the circuit breaker controlling the outlet has flipped off.This must be done while the circuit breaker is still on. Press with the tip of a flat-head screwdriver. Reset buttons are spring-loaded and can be hard to reset. The Spruce Home Improvement Review Board.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |